Starter Units consist of four standard angle posts, four left-to-right standard double rivet angle beams, four front-to-back standard single rivet beams per intermediate level, and two front-to-back standard single rivet beam at one intermediate level only (30" and 36" deep units include two front-to-back single rivet beams at each intermediate level).
Adder Units consist of two standard T-posts, four left-to-right standard double rivet angle beams, two front-to-back standard double rivet angle beam, two left-to-right standard single rivet beam per intermediate level, and one front-to-back standard single rivet beam at one intermediate level only(30" and 26" deep units include one front-to-back single rivet beam at each intermediate level).
Boltless shelving is designed to maximize storage space and minimize installation set-up time. All components are engineered to attach snugly to one another without the use of loose fasteners. This unique design has rivets that are factory attached to all left-to-right and front-to-back beams. The rivets align with keyhole slots in the vertical posts. Once tapped into place using a standard rubber mallet, the units are tightly assembled providing maximum strength.
When designing a shelving layout, unit growth must be considered. To determine the overall dimension of a continuous row of shelving employing T-Posts or Angle Posts with tie plates refer to the table HERE.
Post Capacity Chart & Beam Load Table HERE
Be sure to order decking per level.
Your Choice of Decking - simply drop into place:
Particleboard: HPB 5/8" thick industrial grade 1-M-2
Flat Wire Decking: HWD 4 gauge wire in 2" x 4" pattern.
Shelf strength can be increased by upgrading to single rivet beams running front-to-back at the intermediate levels.
See Below for Components.
• All units/components available in Tan (PT)
See also - Rivetwell Double Rivet Shelving
